DCL-015 Standard Seaworthy Package Solids Removal For Water Municipal Water Treatment Lamella Plate Clarifier
Lamella clarifier inclined plate settler (IPS) a type of settler designed to remove particulates from liquids. They often employed in primary water treatment in place of conventional settling tanks. used in industrial water treatment. inclined plates provide a large effective settling area for a small footprint. The inlet stream is stilled upon entry into the clarifier. Solid particles begin to settle on the plates and begin to accumulate in collection hoppers at the bottom of the clarifier unit. Sludge drawn off at the bottom of the hoppers and the clarified liquid exits the unit at the top over weir.
| DCL
Model | Capacities
(m3/h) | | Physical Dimensions(m) |
| Inlet(a) | Effluent(b) | Sludge(c) | Backwash(d) | L | W | H |
| DCL- | 5 | 80 | 80 | 50 | 50 | 2.55 | 1.6 | 2.9 |
| DCL- | 10 | 100 | 100 | 50 | 50 | 3.35 | 1.82 | 3 |
| DCL- | 15 | 100 | 100 | 50 | 50 | 3.35 | 2.02 | 3 |
| DCL- | 20 | 100 | 100 | 50 | 50 | 3.35 | 2.02 | 3 |
| DCL- | 30 | 150 | 150 | 50 | 50 | 4.2 | 2.22 | 3 |
| DCL- | 40 | 150 | 150 | 50 | 50 | 4 | 2.8 | 3 |
| DCL- | 50 | 200 | 200 | 50 | 50 | 4.65 | 2.82 | 3 |
| DCL- | 60 | 200 | 200 | 50 | 50 | 4.7 | 3 | 3 |
| DCL- | 70 | 250 | 200 | 50 | 50 | 6.4 | 2.6 | 3 |
| DCL- | 80 | 250 | 200 | 50 | 50 | 6.8 | 2.82 | 3 |
| DCL- | 100 | 250 | 250 | 50 | 50 | 7.05 | 3.02 | 3 |
Range Of Applications
- Water following physical-chemical treatment.
- Tailings in mining and metallurgical beneficiation.
- Solutions from gold leaching processes.
- Wet scrubbing effluents.
- Effluent treatment in pulp and paper mills.
- Filter backwash.
Features Of lamella Clarifier
- Unit is Completely Assembled
- Low Installation
- Conservative Design 0.2 GPM/Ft2
- Completely Automatic, Gravity in Gravity Out
- Reduced Floor Space
- Large Compartment Flocculation Tanks with Mixer for Extra Retention Time (approximately 50-60 minutes)
How Does Lamella Clarifier Work
When using, you can choose to add coagulant. The method is to install inclined plate component with an inclination angle of 60 degrees above the suspended layer of sludge. Suspended solids in the raw water, solids or floc alum flowers formed by adding a coagulant are added to the surface area of the inclined plate Accumulate into a thin mud layer, rely on gravity to slide back to the suspended sludge layer, and then sink into the mud hopper.
The sewage pipe is discharged into the sludge tank for further treatment or comprehensive utilization. The supernatant gradually rises to the drain of the water collection , which can be directly discharged or reused.
Dagyee Lamella Clarifier Focus On More Details
Product Tags:
|
|
High Efficiency Lps Lamella Clarifier Leather Plates Sedimentation Units Thickener Images
|
